The most efficient groove to seat a tire's bead is to operate a pneumatic tire changer; but you can accomplish this Homewards using a sporadic altered inexpensive tools. While it takes deeper physical manpower, you'll avoid waiting in extensive lines at your resident tire centre and save a coinage besides.
Rubber Mallet
As you're inflating the tire, you're going to wish to hit the side wall with a rubber mallet. This Testament movement the bead into abode. Unless the tire is duration unabridged with air, hitting it with the mallet won't concern. Cook not practice your hands to push or pull the tire bead into position until it begins to occupancy air; you determine not thirst for to receive your fingers caught between the tire and the rim when the bead seals.
Air Compressor
An air compressor is used to fill the tire with air which Testament seat the bead. After the tire is on the rim, you should be able to seal the bead by inflating the tire with air. You'll know this has happened because you'll hear a distinct "pop" that occurs when the tire is seated onto the rim.
Pry Bar
A saturated soapy brush helps the bead slip into position. The brush should be lubricated with a soapy water solution. Dish detergent works well and reduces friction between the bead of the tire and the rim. Arrange confident not to fill the tire foregone its regulated strength while seating the bead. This could target your tire to blow up. Extremely, filling a tire with also much air will result in uneven tread wear, making the tire ineffective over time.
Lubricate Brush
A pry bar is used to initially break the tire's bead. Place the pry bar between the deflated tire and the rim and pry downward. To avoid scratching and dinging the rim, place a rubber block between the rim and the pry bar. After the top side of the tire is unsealed, lift the tire up, bringing the bottom of the tire to the top of the rim. Then place the pry bar between the rim and the tire and pry up. This will successfully remove the tire from the rim.
