The end of the radiator in your Geo Tracker is to direct the temperature of the doctor that keeps your engine nipping. It's salient to direct the radiator in positive dispute, on the other hand sometimes radiators wear outside over epoch. Whether you are mechanically inclined, you may be able to silver the radiator yourself. Here's alternate the radiator in a 1999 Geo Tracker; on the other hand, the formation is essentially the identical for any year.
Instructions
1. Disconnect the denial battery cable before you found the modus operandi of removing the radiator in your Geo Tracker. Unlocked the radiator and bleed the fluids into a resealable container.
2. Whether your Geo Tracker has an automatic transmission, situate a container under the transmission cooler string Trimmings and disconnect the cooler lines from the radiator. Be confident to plug the ends of the cooler lines so no contaminants can enter the transmission manner.
4. Put the new radiator in position, install the bolts carefully with your fingers to make sure the radiator is lined up properly and tighten them securely. Inspect the hoses, and if they're worn, they should be replaced.
3. Remove the cooling fan and the radiator shroud and disconnect and hoses that you haven't even disconnected. Remove the bolts holding the radiator in place, and lift the radiator out of the engine compartment.
5. Connect the hoses, radiator shroud and cooling fan, and reattach the cooler lines if your Geo has an automatic transmission.
6. Fill the cooling system with a mixture of half distilled water and half engine coolant.
7. Reconnect the negative battery cable. Start the engine and inspect the radiator for leaks.
