Reaching the starter on a Kia Sportage is a tight fit.
Replacing the starter on a 1996 Kia Sportage is an operate in working in tight places. The starter is located on the lower half of the engine on the Chauffeur's side of the vehicle. Although the Sportage does hold a alternate bigness of ground clearance, the starter is tucked between the call housing and the transmission cornerstone braces. Happily, engine or transmission Emigration is not essential, on the other hand provided you annex vast hands, you may gem reaching the top bolts to be crucial.
Instructions
1. Handle the Sportage onto a fix of ramps. Although crawling under the vehicle is practicable, the fresh interval disposed by raising the front edge with ramps makes it easier to occupation. Provided the Sportage does not countdown, jack the front point up and put it on jack stands. Always flash to fix the parking brake for added security.
2. Disconnect the opposite battery cable from the battery with a wrench.
3. Set the starter. If you have trouble reaching the top bolt, use a wrench instead of a socket.5. Pull the starter out.
4. Remove the three bolts that secure the starter to the engine. The top bolt secures it to the engine while the other two lower bolts secure it to the bell housing. Use a swivel to reach the top bolt. It is around 6 inches in length and cylindrical in shape. It is tucked carry on the ring housing and between the transmission cross member and the transmission. It has a broad, black wire connected to the side and one wiring harness on the starter solenoid.
Pull back towards the rear of the vehicle to remove the starter gear from the engine. Allow the starter to drop so you can reach the wiring harness on the starter solenoid.
6. Disconnect the wiring harness from the starter solenoid and then remove the large ground wire connected to the side of the starter. Slide the starter backwards until you can work it between the transmission and the cross member.
