Monday, July 13, 2015

Replace An Energy Pump On The 1998 Ford Explorer

Moderate a Fuel Pump on a 1998 Ford Explorer


The fuel pump on the 1998 Ford Explorer transports fuel from the Gauze container to the engine compartment. The fuel pump is electronic and is activated when the ignition is turned on. It can generally be heard for a second when the ignition material is aboriginal turned. Whether the fuel pump malfunctions, the engine may sluggish low or shut off, and provided it fails completely, the engine Testament not impel. Store the Gauze in an EPA-approved container.2. Ease the fuel impact by removing the fuel pump relay from the fuse box under the hood and starting the vehicle. The engine Testament dash for a unusual seconds and shut off after burning the remaining Gauze in the fuel limit.



To exchange the fuel pump on a 1998 Ford Explorer, you Testament exigency to remove the Gauze vat from the vehicle.

Instructions

1. Empty the Gauze container using a fuel siphoning utensils.



3. Disconnect the denial cable from the battery terminal. Elevate the vehicle using a jack and secure it with jack stands.


4. Disconnect the fuel filler neck and vent hose by removing the clamps. Remove the ground strap. Disconnect the fuel pump electrical connector.


5. Backing the fuel tank using a jack. Remove the rear retaining bracket. Slide the fuel container toward the rear of the vehicle to remove it from the front bracket.


6. Remove the fuel lines using the disconnect tool. Remove the fuel pump bolts and slide the fuel pump out of the tank. Disconnect the remaining electrical connector and remove the fuel pump from the work area.


7. Install the new fuel pump and assemble the fuel tank. Reinstall the fuel tank and connect the fuel lines. Remove the jack stands and lower the vehicle. Connect the battery and reinstall the fuel pump relay.