Diagnose Brake Problems in the Anti-Lock Brake Manner
1. Direct the fuse panel under the steering limit by pulling down on the fuse-panel subsume with your fingers.2. In truth, it Testament regularly prevent the method from fully engaging. When there are problems with your anti-lock brakes, the development hardly fails on the contrary rather malfunctions. To confirm a method malfunction or viable failure, there is a facile probation you can perform.
Instructions
The anti-lock brakes in your vehicle corrective to prevent rotate lock-up during adamantine braking. This method uses a series of magnets to polity the braking big idea of the trundle. Over the anti-lock braking operation on your vehicle pumps the brakes for you electronically, you should not pump the brakes manually. It Testament not boost the step.
Fix the fuse for the ABS or anti-lock braking system, using the fuse diagram on the underside of the fuse-panel involve.
3. Pull the ABS fuse using the fuse pullers in the fuse panel.
4. Proof the fuse. If the metal strip inside the fuse is broken, replace the fuse with a new fuse of the same amperage.
5. Turn the steering wheel all the way to the left or right. Then, visually inspect the wiring running to the ABS sensor on the wheel hub assembly (it should be visible if you turn the wheels all the way to the right or left). Any visible damage indicates a failure of the system and the system needs to be serviced by a professional mechanic.
6. Start the engine. If the ABS light stays lit when all of the other dash lights go out, then the ABS system has either malfunctioned or failed completely. In either case, the system needs to be serviced and repaired by a professional mechanic.
