Trucks come with lots of colorful options, including solid back glass and sliding rear windows, further admitted as a slider. While a solid back window offers added security, a slider Testament own wind to flow easier throughout the cab, forging driving with the windows down a deeper comfortable practice. It besides allows comment with those in a camper, whether one is mounted on the Motor lorry. Provided you yen to install a sliding back window in your Motor lorry, you can complete it yourself with the helping hand of an assistant and some plam tools.
Instructions
1. Regulate the cab doors and custom the flathead screwdriver to business the rubber seal around the back window outside from the inside of the vehicle In relation to the away. The flathead screwdriver can push the rubber lip away, then can be Narcotic sorrounding the mounting lip to remove the rubber. Cook firm the assistant is holding the glass from the out while you are pushing outside the seal. Then remove the back glass.
2. This is going to pull the rubber seal out and around the factory lip, mounting the glass in place.5. Continue to pull the rope around the glass while the assistant follows you, pushing in the window. Once you've gone around the entire window, you may have to use the flathead screwdriver to pull some of the rubber seal towards the inside of the cab, just To cleanse it up a bit.
Have your assistant hold the glass in place while you move to the inside of the vehicle.
4. Start to pull one end of the rope, parallel to the ground, while the assistant pushes the glass in towards the interior. Corner the rope in the rubber seal around the slider window, leaving at least 12-inches of rope hanging out of the rubber seal. Make sure the rope goes around the entire perimeter of the glass and stays in the channel.3. Place the window in the window channel on the cab of the truck with the excess rope on the inside of the vehicle.
