When the primary turns on any automobile and the alone sound heard is "click," it is a solid wager that the solenoid on the starter needs to be replaced. Commemorate to clout the starter with one share when removing the remain bolt. This Testament amass the starter from falling.4. The by oneself contrariety may be the magnitude of the sockets needed to abundant the mechanism.
Instructions
1. Disconnect the battery from the motorcar, on the other hand accomplish not remove it. Disconnecting the battery Testament lock up there is no chance of shock while removing and installing the starter.
2. Disconnect the chestnut and melanoid wires from the back of the starter. Most starters are located at the back of the engine, where it meets the transmission. These two wires function the efficacy from the van to the starter when the chief is turned.
3. Loosen and remove the two bolts holding the starter to the engine with the 9/16 inch socket and wrench. Chevrolet has streamlined the means of replacing this solenoid on their vehicles. The starters are identical accessible and easily removed. The case for changing a solenoid on a Chevrolet is the equivalent as most other makes of vehicle.
Berth the starter on a attempt bench or table. Loosen and remove the two bolts holding the solenoid to the starter with the 8 millimetre socket. The solenoid is the smaller of the two cylinders that beget up the starter.
5. Position the latest solenoid in the alike direction as the old solenoid that was just removed. Make sure the orientation is correct. Reinstall the two bolts that hold the solenoid to the starter. Make sure not to over tighten the bolts. They could break the solenoid.
6. Position the starter in place under the vehicle and install the two bolts that hold the starter in place by hand. Then tighten the bolts with the socket wrench. Make sure not to over tighten these bolts, as they could break the starter or mount.
7. Reinstall the wires to the back of the starter in there proper place. Reattach the battery to the cables. Start the vehicle to make sure the new solenoid works properly.
