Pay for the belongings to test the fluid aligned in your automatic transmission from a third class vendor.
Add 7 quarts of ATF if the transmission has been removed, then warm up the car and check the level with the 9336 dipstick and top off with fluid as needed. If the transmission was completely overhauled or the torque converter was drained or replaced, add 8.5 quarts.
1. Log onto MillerSpecialTools.com and obtain Item Model Number 9336A. This tool retails for $51.72 as of October 2010.
2. Measure the fluid level by inserting the Miller dipstick into the ATF pipe located in the engine compartment. Read the fluid level indicated on the dipstick, noting the temperature variances when the transmission is cold (30 mm), warm (50 mm) or hot (80 mm).
3.Checking the automatic transmission fluid (ATF) comparable in the Chrysler 300C is challenging for the owner performing basic preservation as there is no dipstick if. Checking the fluid is typically done by the dealer using a characteristic dipstick part and a chart. Purchasing this characteristic object online and closest facile directions Testament accord the consumer to confirm the deserved automatic transmission fluid flush.
