After an accident or still a manageable stone hitting your windscreen, you may must to change the glass owing to of cracks that can diminish your conception of the path. It can bill expanded than $500 to modify the windscreen on a Chevy pickup. Removing the windscreen yourself and installing a contemporary one isn't evident, however you Testament remuneration onliest the fee of the windscreen, adhesive and a windshield knife. You should gather several people to be your assistants; you'll need the extra help.
Instructions
1. Unscrew the rearview mirror from the interior of the truck windshield, using the Phillips screwdriver. Tape over the front vents near your windshield with masking tape to prevent debris from falling into them.
2. Unscrew each wiper arm nut with the pliers. Remove each complete windshield wiper.
3. Push the windshield knife in through the windshield black weatherstripping gasket. Get the knife as close as you can to the outer edge of the glass windshield. Slowly cut around the perimeter of the windshield.
4. Screw the rearview mirror back on, and remove the tape covering the front vents. Screw the windshield wiper arm nuts back in to secure the windshield wipers.
6. Start in one corner and firmly press the weatherstripping gasket in around the gasket groove around the entire windshield. Apply a small bead of windshield adhesive to the bottom lip of the channel around the inside of the new weatherstripping gasket. Apply a thin layer of KY jelly to the upper lip of the channel around the inside of the gasket.
7. Set the base of the new windshield slowly into the lower groove of the weatherstripping gasket, with an assistant on each side of the windshield. Slowly lean the windshield back while the assistants pry the gasket channel up so the windshield slides into the gasket channel all the way around the windshield. Allow the windshield to dry in a cool, dry place for 24 hours.
8. Have an assistant push the windshield out from the inside as you and another person grab it on the outside. Set the old windshield aside.5. Scrape the rest of the weatherstripping and adhesive off with the windshield knife until the frame is clean steel.
