The authentic head of emergency brakes was to speck your vehicle in an emergency. Happily, the brakes on a Ford F-Series hardly fail and the emergency brakes are most commonly used to conserve the vehicle from Stirring while parked. The most doable type of failure for emergency brakes is when the brake cable rusts and seizes when it's not used for a deep age.
Instructions
Complete the installation by reversing the removal procedure and use the parking brake shoe adjuster wheel to set the parking brake shoe clearance to 0.6mm. The emergency brakes for the Ford F-Series cause the CD brakes on the rear wheels.
2. Maneuver the vehicle over a hoist and lay it in impartial gear. Proceeds the parking brake discipline completely. Remove the left A-pillar lower trim panel.
3. Adoption an assistant to pull down on the intermediate parking brake cable until the parking brake check sector rotates to its end. Subsume a 4mm retainer pin to Proceeds the parking brake cable tension.
4. Disconnect the cable at the cable-to-cable union with a socket wrench. Remove the rear brake disc, brake shoe adjuster screw and brake shoe adjuster screw spring with a Phillips screwdriver. Remove both brake shoe hold-down springs, pins and the brake shoe retracting spring. You can now remove the parking brake shoes.
5. Lubricate the new parking brake shoes where they contact the wear pad. Install the new shoes and ensure they are centered.
6.1. Decide which type of emergency brakes your Ford F-Series Testament itch. Emergency brakes typically service by activating the universal braking step on the driving wheels.
