Before replacing the starter on a 1992 Ford Convoy, it would be experienced to trial the endowment assistance to confirm the starter is poor. With the crucial off, there should be battery voltage at the leading "B" terminal on the starter solenoid. The insufficient wire connected to the "S" terminal is the wire from the ignition main. This activates the solenoid and the starter. The voltage should be checked at this terminal when the helper holds the decisive in the originate position. Battery voltage should be being apart when the primary is in the flying start position.
Instructions
1. Remove the air cleaner and the air duct to the throttle protest. Remove the antagonistic terminal on the battery, using a wrench.
Remove the bottom bolt in the starter, using a 15-mm socket. Pull the starter out of the hole in the flexplate cover and from the vehicle.5. Install the new starter in the reverse of removal.
Remove the intake manifold-to-starter support bracket, using the appropriate-size socket. Remove the small wire connected to the "S" terminal, using a wrench.
4. Remove the larger wire connected to the "B" terminal, using a 13-mm wrench.2. Remove the top bolt in the starter, using a 15-mm socket. Raise the front of the car and support it on jack stands for safety.3.
