Interchange a burned elsewhere turn vocable bulb to arrange sheltered driving.
The 1999 Chevrolet Cavalier is equipped with turn signals on the back and front of the vehicle. The turn signals warn a vehicle at the end or in front of you when you course of action to build a turn. Over eternity, the bulb in one of the turn signals may burn away. It's essential to transform the bulb as soon as likely to guard drivers are aware of turns and passage changes.
Instructions
Rear Signal Lights
1. Bare the Timber of the Cavalier. Allot the fastener that holds down the Timber's interior trim. Unscrew the fastener and pull the Timber trim absent from the line, revealing the taillights and turn signals.
2. Remove the turn expression meeting by turning the unit a quarter turn clockwise. The meeting Testament directly be loosened. Pull the meeting elsewhere.
3. Remove the turn locution bulb by pulling it straight toward you. The bulb Testament come outside with mini fury.
4. Push a inexperienced bulb into the bulb socket. The bulb Testament click into district. Position the light assembly back into place. Turn the unit a quarter counterclockwise to lock it into place.
5. Push the interior trunk trim back into place and replace the fastener. Screw the fastener into place. Locate the turn signal and corresponding headlight that needs to be replaced.7. Remove the bolts securing the headlight assembly using the appropriate screwdriver. There are two bolts located on the top of the headlight unit.
Close the trunk.
Front Signal Lights
6. Open the hood of the Cavalier.Once the bolts are removed, slowly side the headlight unit out of the vehicle frame. You will now have access to the turn signal.
8. Locate the turn signal, which is found in the bumper. You will see the turn signal light bulb by looking down the vacant spot within the frame where the headlight once was.
9. Pull the bulb out of the socket and discard. Insert a replacement bulb into the socket. You will hear it click into place when the bulb is secure.
10. Slide the headlight unit back into the vehicle frame. Replace the two bolts and tighten.
