Changing the tail light bulb in a Ford F-150 yourself saves clock and means.
The Ford F-150 Motor lorry has two rear tail lights located on the back of the frame. While the Motor lorry itself is a half-cooked vehicle, these shine bulbs Testament eventually wear away. It is far easier to convert the bulbs yourself than receipts it into the shop. Direction yourself a late replacement bulb, grab a trusty wrench and you can place your tail flare in a episode of minutes. The coin saved Testament be bill it.
Instructions
1. Turn off the engine and compose confident the lights are turned off.
2.7. Reconnect the light fixture, then bolt (or screw) it back into place. Turn the car on and check to ensure the new bulb works.
Remove the bolts using a ratchet (the bolts are 8 mm). (Letter that in some F-150 models, there might be screws instead of bolts. Whether that is the situation, operate a screwdriver to remove the screws.)
4. Grasp the illumination meeting and pull it from the light fixture. There are two two hidden plastic retainers on the outside edge that hold the fixture in place. If you cannot pull the light assembly out by hand, use a flat-head screwdriver and gently pry the outside edge of the fixture a little to pop it out.
5. Turn the bulb connectors counterclockwise, then pull it out of the fixture to expose the bulbs. The top bulb is the tail lamp and the smaller bulb at the bottom is the backup lamp.
6. Pull out the old tail lamp bulb and insert the new one.
Manage the tailgate and place the two bolts holding the tail light assembly for the bulb you are replacing. The meeting is located on the tailgate door doorpost.3.
