Hail damage normally affects the hood, roof and Timber of cars.4. Spray each repaired and sanded area with primer. This can be primer in a spray can, or mixed and applied from a paint spray gun. Hold the sprayer or can 10 to 16 inches from the surface.
Instructions
1. Grind the stain away of Everyone dent using 80-grit sandpaper and a grinder. The repair materials won't adhere to the emulsion, so it must be removed so that alone the naked metal is showing inside and up to three inches surrounding the ding.
2. Utilize item filler to each dent using a plastic squeegee to fill in and smooth the filler. Let the filler dry for one age.
3. Sand the filler using 220-grit sandpaper. Sand until the filler is constant with the surrounding surface of the motorcar. You shouldn't be able to touch dents and dings when you race your artisan over the repaired sphere. Community masking tape and paper encompassing the areas that are being repaired. If the hood is being repaired, line the outer edges with the tape and let the paper cover the fenders, front of the car and the windshield.
Damage includes diverse dwarf dings on all of these areas, and may not be covered by your insurance game plan. As of the date it takes to repair Everyone ding, a intent repair shop Testament charge various hours labour for Everyone thing panel to be repaired, plus the fee of the materials. In most cases, provided insurance doesn't fully comprehend the repairs, it can save a group of cash provided you remove hail damage dents yourself. Apply one thick coat of primer and let it dry for 30 minutes.
5. Sand the dried primer with 400-grit sandpaper to smooth the primer's surface. Don't sand through the primer to the filler; just sand enough to knock off the top of the primer's coat. Wipe the sanded surface with wax and grease remover and a towel to get rid of any greasy fingerprints or old wax residue, since paint won't adhere to these contaminants.
6. Paint all of the areas that were sprayed with primer. Hold the sprayer or can 12 to 16 inches from the surface. Apply 3 to 6 coats of paint, keeping the coats thin to avoid runs. Wait 10 minutes between each coat. After the final coat is applied, wait a full 24 hours before handling the paint.
