The radiator is the leading Element of the Ford F150's cooling action. Whether the radiator is not working, the Motor lorry Testament overheat in a precipitation, influential to engine breakdown, which can prove to be a exact costly proposition. The exact development of removing and installing the radiator can vary, depending on the year of the Motor lorry and the engine type.
Instructions
Radiator Removal
1. Disconnect the Motor lorry's balky battery cable.
2. Withdraw the engine coolant by placing a colossal container under the radiator extract, connecting a hose to the bleed becoming and then opening it.
3. Disconnect and remove the air inlet duct to the air cleaner housing and the housing bracket provided the Motor lorry has a 5.4 litre engine. For a 4.6 litre engine, too remove the air cleaner housing.
Re-connect all other parts, which can include the radiator hoses, the radiator cover, the air cleaner housing/inlet duct and the battery cable.14. Refill the radiator with the engine coolant; if the old coolant is dirty, use a fresh half-and-half mixture of antifreeze and water.
This includes the upper and lower radiator hoses and the expansion vehicle hose; pliers Testament guidance loosen the clamps.
6. Remove the cooling fan and the fan shroud--disconnect the fan and clutch meeting with a fan wrench establish, letting the meeting rest within the shroud, then remove the shroud's mounting bolts and the shroud itself.
7. Disconnect the oil cooler lines provided the Motor lorry has an automatic transmission--remove and act back the secondary plastic clip on the limit, attach the effects onto the edge, push it into its becoming and then pull it straight absent.
8. Unbolt and remove the two brackets that secure the top cut of the radiator, using a wrench, then lift the radiator outside.
Radiator Installation
9. See the condition of the rubber insulators in the mounting brackets and on the radiator's bottom mount to the truck frame. Replace them, if needed.
10. Insert the replacement radiator in place and bolt in the top brackets.
11. Connect the disconnected oil cooler lines (for an automatic transmission truck only) by using the quick-connect fittings.
12. Install the cooling fan and fan shroud--bolt it in place and connect it to the radiator using the fan wrench set.
13.4. Detach the radiator involve by releasing its seven locking pins.5. Remove all hoses from the radiator by loosening their clamps.
