Correct automobile maintainance is required to control your vehicle in useful case.
The 2002 Hyundai Accent has an in-line fuel filter. The filter is connected to the fuel border so that as Gauze is pumped from the fuel vat to the engine, the filter can trap dirt and rust particles. It is cardinal to remove and install a dewy fuel filter when it becomes clogged with extremely still dirt. Happily, replacing the fuel filter on your 2002 Hyundai Accent is a incomplex procedure.
Tighten the wrench until it is secured firmly sorrounding the fuel contour. Turn the wrench counterclockwise to disconnect the fuel contour from the fuel filter. Repeat this procedure for the opposite end of the filter.
Engage the parking brake or practice tires stops to prevent the vehicle from rolling while you are changing the filter. Extended the hood and disconnect the balky battery cable from the battery with a wrench. Unscrew the Gauze filler cap.
2. Crawl underneath the Accent from the rear of the vehicle. Place the fuel filter honorable below the contents sphere near the fuel receptacle. The filter is a metal cylinder connected to a ebony hose at both ends. This inklike hose, the fuel limit, runs from the fuel receptacle to the engine.
3. Examine the fuel filter. You should indication that it is surrounded by a mounting bracket which secures it to the frame of the vehicle. Operate an adjustable wrench to remove the flange bolts on the mounting bracket. Allot the bolts aside as you remove them from the mounting bracket. Once you include removed all of the bolts, remove the mounting bracket further.
4. Handle an adjustable wrench to the connexion field between the fuel filter and the fuel borderline.
Instructions
1. Field the 2002 Hyundai Accent on common ground. When you have disconnected the filter from the fuel line, discard the old filter.5. Align a new fuel filter with the fuel line. Make sure that the white arrows on the side of the filter are pointed forward towards the engine. Secure the fuel line to the fuel filter with the wrench. Instead of turning the wrench counterclockwise as you did before, turn it clockwise until the fuel line is secure.
6. Mount the fuel filter onto the frame of the vehicle with the mounting bracket and bolts. Reconnect the negative battery cable. Screw on the gas filler cap. Turn the vehicle on and let it idle for at least five minutes. Check for leaks from the fuel filter. If you find a leak, turn the vehicle off and re-tighten the fuel line to the fuel filter.
