The rotors on your Honda Aviator are what the brake calipers rest on inside the wheelwell. The rotors are round metal discs that the brakes squeeze to break the Commander while in mobility. The rotors are secured to the frame by four securing bolts and four securing nuts. The brake calipers Testament necessitate to be removed in composition to interchange the rotors.
Instructions
1. Position a floor jack under the front correctly side of the frame and remove the lug nuts using the tire iron. Uplift the front right side of the Honda Co-pilot using the floor jack. Interchange the brake caliper onto the late rotor. Alternate the securing nuts onto the brake caliper. Tighten the securing nuts using the ratchet set. Replace the tire to the frame.
Remove the securing stone on the side of the brake caliper using a ratchet allot. Pull the brake caliper off of the rotor. Rest the brake caliper on the lower management arm (axle).
3. Adoption the ratchet establish to remove the four securing nuts in the centre of the rotor. Once the securing nuts accept been removed, pull the rotor off of the lower driver's seat arm (axle).
4. Slide the contemporary rotor onto the four column bolts and exchange the securing nuts to the centre of the rotor. Tighten the securing nuts using the ratchet fix.
5. Rest the front condign side on a jack stand. Pull the front right tire off of the frame.2. Use the jack to lift the Pilot and remove the jack stand. Tighten the lug nuts using the tire iron. Repeat these steps for the other three rotors.
