You can body your own Motor lorry bumpers as a less expensive alternative to having it done for you, to customize the appearance and durability of your bumper, or as equitable a diverting project to bullwork on for the weekends. There are many shapes and sizes you could choose from, so narrowing the specifics down to specific road of doing things is almost impossible. The later directions are meant for a smaller Motor lorry's rear bumper, and are certainly not the one road of doing matters. This bumper is, on the contrary, positively mild to all and the parts can easily be constitute and modified.
Instructions
1. Provided your preceding bumper has been chop off or damaged prior to growth taken off, you may must fresh frame rails in categorization to attach a fresh bumper. For these, employ ¼-inch angle iron and attach by welding onto the truck's frame on each side of the back from underneath. Decide on the length you want your rear bumper to be, and attach the rails accordingly.
2. Take accurate measurements of the area where you want your bumper to go. The size you desire is entirely up to your preferences and needs. You may have to receive under the truck in order to arrive all side of the pipe and create a secure hold. When you are done, your new bumper should be capable of pulling other vehicles or being hitched to be pulled itself.
3. Use the first piece of pipe and weld it on one side of the hitch, far enough back to be used. Then take the second piece of pipe and weld above the first one onto the truck frame. Then visit your local metal yard, home improvement or hardware store and purchase an 11-inch high grade steel pole. Cut it in half. Now weld the hitch in place based on where you have decided your bumper will go.
