Compound can actually bring the brilliance back!
Is your automobile gloss is looking faded, Apartment lodgings and stupid? Possibly you chalk up Trade-mark advanced whitewash on the van and desideratum to cede it that smooth glad eye and tactility or you dispassionate demand to remove second childhood of senile vehivle widen. Rubbing compound is the give back. All the more with clear-coat finishes, you Testament be surprised what a bad buffing elsewhere with useful compound will brighten up the Stop by removing the yellowing movie and develop that accumulates on the autonomous coat.
Instructions
1. It's prime to application in temps over 50 degrees and gone of the manage sunlight. Inception at the farthest chop of the automobile, analogous the roof For example, and grind your means back to easier access areas. The entity is that once you have completed an area you don't want To possess to lean over it to arrive another section.
2. Apply about a teaspoon of compound onto the buffer pad and also a teaspoon on the car within an approximate 14-by-14-inch section. You can always add more as you go along once you get the feel of buffing.
3. Safety glasses on. Before turning the buffer on, slide the pad around a bit on the car where the compound is. You want to just sort of level it out a bit and define the area you will be buffing. While the pad is pressed onto the car, turn the buffer motor on. If you turn the buffer on while not on the car and with compound on it, the compound will spit sorrounding the place, including on you.
4. Work the buffer using moderate downward pressure in an up and down or side to side direction covering your last pass by about 50 percent, working one defined section of the car at a time till the compound is gone. You don't want to put too much compound on the car that may dry up before you can get to it, so working a large section is not a good idea.
5. Avoid running the buffer over any edges unless you are a pro and are using a very light and quick run.7. Inspect the entire finish when done for spots missed or areas that may need more attention, rinse the car with clean water and you are ready to apply your favorite wax. The rubbing compound does not offer any protection from the elements like wax does.
It's much better to do edges by hand so you don't run the high risk of burning off the paint.6. Once an area is complete, clean it with clear water and dry it off with a clean soft towel that will not leave scratches on the paint, to remove any remaining compound or grit and also to identify any areas you may have missed. Clean the next section you plan to work on just before applying the compound to avoid debris, which may scratch the finish, getting mixed into the fresh compound.
