Remove the grip to access the lock cylinder fully
Replacing the door locks on your Doge Dakota might be a cold manner whether you bear forfeit a crucial and conclude it ha assign your Motor lorry at risk. The lock on Everyone door involves a cylinder that the guide goes into and is connected to the door hook and the door handles. You exigency to exchange the locks on all doors, or els you're looking at needing multiple keys for the doors.3. Unscrew all of the door panel's retaining screws with a screwdriver; this should add screws at the backside edg of the panel and remain the inner door knob.4.
1. Stand the door's window completely.
2. Pry the window direction switch with a trim stick and disconnect its electrical connector.
Detain in creativity you Testament duty two keys unless you can install the equivalent lock cylinder with the ignition switch.
Instructions
Trim Panel
Pull upward on the door panel to Proceeds it from its hooks/clips, then elevate it up and off the door. Disconnect all wiring harness connectors and the link rod to the inner manipulate.
5. Peel out the plastic saturate shield on the door carry on the panel.
Lock Cylinder
6. Disconnect the link rods from the outside door handle and detach the handle from the door by removing its mounting nuts with the wrench.
7. Separate the link rod from the lock cylinder. Remove the lock cylinder's mounting screw and remove the cylinder from the door.
8. Install the replacement lock cylinder into the door and bolt it in place. Connect the link to the cylinder.
9. Insert the outside door handle back on the door, connect its mounting nuts and connect the link rods.
10. Re-connect the door's inner trim panel in the reverse order of removal.
