The Toyota Tacoma started Industry in dilatory 1995. Its manufacturing time was synchronized with the implementation of OBD II (on-board diagnostics two), which standardized machine diagnostics for all vehicles in 1996. The research engine brilliance communicates a complication in the emissions step or any other action monitored by sensors that are in plain indication with the engine charge module. When one of these components fail, the machine indicates the failure and triggers the evaluation engine light. These failures are called diagnostic trouble codes (DTCs) and should be diagnosed and rectified before attempting to reset the light.
This may take several driving cycles to occur.6. Check the status of the check engine light by unplugging the scan tool and then starting the Tacoma. The check engine light should not be illuminated as long as a hard code is not re-triggering the faulty device.
The shape of the connector will match the trapezoidal shape of the plug connection on the OBD II scan tool.
2. Attach the plug of the OBD II scan tool to the DLC of the Tacoma. Make sure it is plugged in thoroughly.
3. Place the ignition key into the Tacoma and turn it two clicks to activate the "key-on/engine-off" mode. This mode illuminates the dash and activates the power to the electrical options in the truck without actually starting the engine. It will also provide power to the scan tool from an accessory fuse powered by the battery.
4. Read the screen of the OBD II scan tool. There are many different kinds with slightly different options, but overall, they function similarly. Scroll buttons and "enter" or "select" keys will help you navigate through the several features the scan tool offers. It is recommended to "read codes" first before resetting, unless you have already made the necessary repair that triggered the check engine light.
5. Scroll to the "reset" or "erase code" option once the code(s) have been documented, if applicable. Press the "enter"or "select" button to confirm you want to erase the code(s). A few seconds will pass and the OBD II scanner will alert you that the command is being sent to the ECM of the Tacoma. Once the main menu of the scan tool reappears, the check engine light is reset. Be aware that hard codes and even minor codes can and will re-trigger the check engine light if not rectified. Hard codes may re-trigger immediately or may have to endure the IM monitor reset of the ECM.
