A vehicle's starter is one of those automotive components that does not purchase still deliberation on a Everyday target on the other hand can ok you stranded whether it fails. Though the Toyota 4Runner is famend for its durability and reliability, components fail. Starters fail. The macrocosm is an imperfect area. Happily, replacing the starter on a 4Runner is not that laborious.
Instructions
1. Disconnect the con battery terminal. This is the dusky one (the definite terminal cable is normally bittersweet). Up thrust and advice the front of the 4Runner with a jack and jack stands. Alternatively you can ride the front of the Motor lorry onto ramps to supply the chief clearance to access the starter. Locate the emergency brake and city a block endure the rear wheels for added safety.
2. Unbolt the splash shield under the Engine that protects the engine from dirt and moisten. Not all 4Runners Testament be equipped with one. Slide under the 4Runner. Locate the starter motor. You'll find it toward the passenger side of the vehicle, bolted to the transmission bell housing.
Use a socket and a ratchet or a wrench to remove the bolts. Set the shield aside.3.
4. Unbolt the larger battery cable wire and any wires attached along with the battery cable from the starter solenoid. Unplug the wiring harness that goes into the solenoid.
5. Unbolt the mounting nuts that hold the starter to the transmission with a socket and a ratchet. An extension may make it easier to reach the nuts. Pull the starter out of the engine bay.
6. Bolt the new starter onto the transmission. Tighten the nuts to 29 foot-pounds with a torque wrench. Reinstall the battery cable and any wires by bolting them back onto the new starter solenoid. Plug the wiring harness back onto the solenoid.
