Sanding motorcycle plastic is one of the most critical steps to repainting the plastics on your bike.2. Confess the paint remover to sit for 5 minutes and then sand the full painted surface of the plastic using the 80-grit sand paper. Sand the surface until all of the gloss is removed.3.
Instructions
1. Deposit all of the motorcycle's plastic parts on a Disinfected, dry and Apartment lodgings surface. Handle a petite proportions of non-acetone stain remover to a cloth and rub the entire painted surface of one of the parts.
Plastic that you Testament be sanding Testament entail to be removed from the bike before you can proceed with this calling. All motorcycles are contrastive so the operation for removing the parts Testament differ from bike to bike. Before your can properly sand the bike's plastic you Testament obligation to remove all of the whitewash that is on the parts.
Wash the apportionment using lukewarm flood and soap to remove the paint remover and the paint dust. Completely dry the plastic part with a cloth.
4. Sand the entire surface of the part using the 100-grit sand paper. Wipe away all of the paint dust, and sand the part using the 120-grit sand paper. Repeat these steps for all other plastic parts that you need sanded for the motorcycle.
