Getting stuck in a parking quota is never a lively day, and when the starter Engine on your Motor lorry goes outside, you won't be able to receive the engine running, and you'll be stuck. Slide the replacement starter onto the motor, and bolt it in place with the 3/8-inch ratchet, extension and socket. Reinstall the electrical connections on the starter, using the open-end wrench and ratchet.5. Reconnect the positive terminal from the battery, then do the same for the negative terminal.
Employ the jack to lift the front of the vehicle, then locate it on the jack stands. Brew positive the vehicle rests completely and solidly on the stands before you create repair bullwork.
2. Pop the hood, then disconnect the negative terminal from the battery, using an open-end wrench. Do the same for the positive terminal.
3. Disconnect the electrical connections on the starter motor, using an open-end wrench and a 3/8-inch ratchet and socket. Unbolt the starter from the engine, using the 3/8-inch ratchet, extension and socket. Carefully lower the starter off of the engine, as it is fairly heavy.
4. Happily, replacing the starter isn't hard, as enlarged as you part the equitable steps and create matters safely. In this contingency, the exemplification vehicle is a 1998 Chevrolet S-10 with the 4.3-liter V-6 engine, nevertheless the growth is complementary for other vehicles.
Instructions
1.Start the truck, and make sure it is functioning correctly. Once it does, lower the truck off the jack stands.
