Stopping your vehicle is model crucial. It is primary that the brake pads are changed as soon as you hear a squeaking sound when trying to bar. Brake pads can be bought at any Car parts store or at the assistance counter of your automobile dealership. Doing it yourself Testament save you the labour costs of having it done professionally.
Instructions
1. Loosen the brake fluid reservoir cap and grip off the bolts that control the reservoir in situate. Haul off the caliper unit, and you Testament distinguish the senile brake pads. Get into the car and push on the brakes a few times to make sure there is the proper amount of resistance again. Tighten the cap on the brake fluid reservoir.
Take the new brake pads out of the box and push them into place. This may take a bit of muscle to get them securely in place. Instead of pushing them by hand, a rubber mallet could be used. Gently tap the new brake pads into place with the mallet.
3. Use a C-clamp to push the piston in. You may need to place a piece of metal on top of the piston due to the old brake pads being thinner than the new ones because of wear and tear. Position the caliper back in place with the bolts. Make sure not to disturb any of the rubber seals.
4. Place the wheel back on the vehicle. Take the old brake pads off, which may take a little bit of elbow grease, but being careful not to break any of the clips at the ends. If they are damaged, you will need to buy new ones.2.
