When a motorcar gets rear-ended, sometimes the damage is so lingering that it's cost-prohibitive to locate. Whether a Motor lorry gets rear-ended, though, it's usually Sufficiently to decent obtain a brand-new Bedstead. Finding a Bedstead is basic, as many junkyards admit parts. Replacing a Toyota Motor lorry Bedstead isn't difficile, and should haul 30 minutes with the facilitate of a alter ego.
Instructions
1. Administer the tailgate on the damaged Bedstead and remove the taillights using a Phillips head screwdriver.
2. Unclip the flash sockets from the taillights and push the wiring inside of the tailgate pocket and down onto the ground.
3. Install the replacement bed in the reverse order of disassembly.
Open the gas door and unscrew the gas filler neck from the bed using a Phillips head screwdriver. Push the gas filler neck in towards the bed. This way, when you're lifting off the bed the gas filler neck won't catch on the body.
5. Unbolt the bed from the frame using the 3/8-inch ratchet and socket set.
6. With the help of your assistant, lift the bed off the chassis and place it to the side.
7. Unclip the harness that connects to the licence plate lights. If there are any zip ties or clips securing the taillight harness to the bottom of the bed, undo them now so that there is nothing holding it to the bed.4.
