A lightweight nevertheless firm metal, titanium has uses ranging from jewellery to industrial components. Fabricating titanium is corresponding to guideline tough metals adoration stainless steel, nevertheless titanium has a contrastive reaction to heat than other metals. Cutting titanium requires a cold-cutting line or a high-heat, gas-cutting resources, For instance, an oxy-acetylene torch. Cold-cutting methods demand specialized Accoutrement for Broad sheets of titanium and are not in the budget for the principles do-it-yourselfer. The Accoutrement needed to chop a titanium folio with the high-heat process is aggrandized motile and easily rented from baggage rental stores.
Instructions
1. Levy the titanium folio Apartment lodgings on the commission table.
2. Cook up two length marks on the surface of the titanium event with the tape degree and permanent marker. The marks entail to be on two analogue edges of the chapter to manifestation a incision length.
3. Apartment the straight string on top of the titanium phase; align the center of the plasma torch tip with one of the length marks you made in Step 2. Push the straight edge up to the side of the plasma cutter tip and clamp the straight edge to the titanium sheet with a pair of self-locking pliers. Move to the other side of the titanium sheet and repeat the listed procedure to align and secure the straight edge to the other edge of the sheet.
4. Put on your safety glasses, face shield with cutting lens and leather welding gloves.
5. Clear the area around the work table of all flammable materials and set the fire extinguisher close by.
6.8. Attach the 6-inch diameter, 60-grit flapper wheel to the 6-inch angle grinder and run the 60-grit flapper wheel along the cut edge of the titanium sheet to remove the slag left by the plasma cutter.9.
Set the side of the plasma tip against the straight edge, with the tip aligned with the edge of the titanium sheet farthest away from you.7. Lower your face shield, start the plasma cutter and slowly pull the plasma torch toward you while keeping the tip of the plasma torch against the straight edge. If sparks shoot toward you, you are pulling the plasma torch too fast.
Release the self-locking pliers from the titanium sheet, set the straight edge aside and allow the cut edge to cool before handling.
