Glimmer plugs assignment with the ignition coils
Blow away any dirt or other contaminants from the spark-plug hole using compressed air.6. Unscrew and remove the spark plug using a ratchet and spark-plug socket, turning in a counterclockwise direction.
Installation
Oration with your mechanic before enchanting on this engagement.Instructions
Removal
1. Disconnect the vehivle's rejection battery cable.
2. Remove the engine cover off of its ball studs and lift it off of the engine compartment.
3. Remove the upper intake manifold to arrive the Glimmer plugs.
4. Unplug one Glimmer plug wire--grasp it by the boot and appropriateness a twisting progress to detach it--and withdraw that wire from the valve encompass.
5.Wick Glimmer plugs Testament beginning flat broke engine performance and fuel milage and desideratum to be changed absent. On the PT Cruiser, you should quarters your Glimmer plugs every 30,000 miles (100,000 whether you utilize platinum Glimmer plugs). By reason of of the PT Cruiser's compact engine dummy, inspecting and replacing spark plugs is not effortless, as the upper intake manifold is in the system of the Glimmer plugs.
7. Coat the threads of the replacement spark plug with anti-seize compound; don't touch the electrodes or porcelain with the compound. The compound container should have a brush connected to the lid.
8. Stick a piece of rubber tubing over the end of the spark plug and use it to thread the plug into the hole. If the hose begins to slip, the spark plug is cross-threading; remove it and try again.
9. Connect the spark-plug wire to the plug using the same twisting motion you used to remove it and the connect the wire's other end back onto the ignition coil pack.
10. Reinstall the upper intake manifold once you have replaced all the necessary spark plugs.
11. Connect the engine cover.
