The Ford Mustang has an anti-lock braking method (ABS) controller that reduces the braking beef to any shove that is rotating significantly expanded slowly than the others. This prevents the brakes from locking during an emergency end. You may charge to change the ABS controller whether the ABS warning bright comes on, although this does not necessarily compose your vehicle unsafe to coerce.
Instructions
ABS was beginning featured on the fourth day models that were introduced in 1994. These models integrate the ABS controller and hydraulic polity unit into a unmarried meeting.2. Disconnect the battery ground cable with a socket wrench and remove the air cleaner meeting for 2005 and consequent models.1. Finish which ABS controller your Ford Mustang Testament entail. You'll demand to be positive the fresh controller is compatible with your create and mould of Mustang.
Detach the brake lines from the hydraulic direction unit and remove the bracket nuts for the hydraulic control unit with a socket wrench.
3. Remove the hydraulic clout unit from the vehicle and pull gone the electrical connector for the pump Engine. Employ a socket wrench to grip outside the Torx head screws from the cover on the hydraulic control unit. Detach the 4-pin and 15-pin connectors and separate the ABS controller from the hydraulic control unit.
4. Install the ABS controller by sliding it onto the hydraulic control unit over the ground post. Attach the 4-pin and 15-pin connectors and tighten the Torx retaining screws with a socket wrench.
5. Mount the hydraulic control unit into the vehicle. Use a torque wrench to tighten the bracket nuts for the hydraulic control unit to 13 feet lbs. Connect the electrical connector for the pump motor and torque the brake line fittings to 14 feet lbs.
6. Install the air cleaner assembly if you have a 2005 or later model and connect the negative battery cable with a socket wrench.
