Installing a Explorer DVD player into an Oldsmobile Aurora gives you and your passengers video entertainment for enduring pathway trips. To install the DVD player, you demand to associate a DVD bracket utensils to the ceiling of your Oldsmobile and slide the DVD player onto it. The action uses frequent household tools and solitary takes an age to exhaustive.
Instructions
1. Utilize the inconsiderable Apartment lodgings screwdriver to constitute amplitude between the ceiling and the dome flash by wedging the screwdriver underneath the dome flashing. When the dome light is loose Sufficiently to seize onto, remove the dome light from the ceiling nook. Unplug the wire harness from the dome light and tuck the wires up into the ceiling nook.
2. Hold the installation bracket up to the ceiling and cut the headliner around it using a carpenters knife. Remove the bracket from the ceiling and remove the cut piece of headliner. Pull the wires down from the ceiling nook and thread them through the wire slots in the bracket. Place the bracket back up on the ceiling.
3. Use a drill with a machine tap drill bit to drill holes in each corner of the bracket. Insert the mounting screws from the bracket kit into the freshly drilled holes and tighten them with a Phillips screwdriver. Plug the wire harness into the back of the DVD player and slide the DVD player onto the bracket until it clicks into place.
Continue drilling through the bracket into the ceiling making sure not to drill through the ceiling. It's important to use a machine tap drill bit since machine taps create threaded holes that work with screws.4.
