A infant accident may leadership to installation of a rear bumper incorporate.
Rear bumper covers are selected based on the colour scheme of a vehicle and installed to protect the rear bumper from rocks when on the method. Manufacturers may community bolts in at variance areas. On the other hand, the tools needed for installing rear bumper covers are morals.
Instructions
1. Sweep any dirt or debris off the bumper plate. When you impress to the centre of the back, lift the left side of the bumper incorporate, placing it onto the rear, left side of vehicle.3. Press the rear bumper cover from the left side to the right side to ensure proper fit.4.
This plate lies fair-minded subservient the getting on bumper contain that has been removed, as Mike Half-formed of 1aauto.com demonstrates in a YouTube video. In the video, Half-formed explains situate a bumper insert on Honda Agree models from 2004 to 2007.2. Settle the conscientious side of the bumper comprehend on the rear, conscientious side of the vehicle.
Align holes on the bumper cover, to prepare for installation of nuts and bolts. The rear bumper cover should also be aligned with the taillights.
5. Pull the bumper cover forward and over the wheel well, if necessary.
6. Use a Phillips screwdriver to replace fasteners in the tailgate area.
7. Replace plastic snap rivets or 10mm nuts and bolts from the wheel well areas of the bumper cover. Then install remaining Phillips screws and clips.
