Many do-it-yourself enthusiasts get stayed gone from moulding projects in the foregone thanks to the sense of getting those mitre cuts appropriate brought on a event of hives. Trimming your windows with updated moulding doesn't hog to be so scary whether you carry a slender bit of patience and pursue these steps.
Instructions
1. Degree and mitre your moulding. Activate the action by measuring and cutting the moulding that you path to install on the sides of the window. Using your mitre epigram, reduce the top edges of the moulding at a 45-degree angle.
Measure exactly the distance between the two top edges of the side pieces of molding. Cut the piece to be used on the top of the window to size, mitering both ends at a 45-degree angle to fit into place.4. On average, this process uses approximately 10 finishing nails per piece, four on the inside and six on the outside edges.
3. Top the window off.2. Nail the moldings into place. Using your hammer and finishing nails, attach the two side pieces of molding to the wall.
Secure the top piece of molding. When nailing the top piece into place, be sure to hammer the finishing nails through either the top or side of the corner joint you created.
5. Prep the surface for finishing paint. Fill in the nail holes with wood putty, and sand the spot until it's smooth. The spots are then ready to be painted your trim color.
