The ignition switch in your Chevrolet Motor lorry isn't the full meeting on the steering column, rather aloof the electric switch connected to the lock cylinder.1. Emptied the hood and disconnect the colorless cable from your Motor lorry's battery.2.
Whether the switch is dangerous (trial it by turning the major and seeing provided the warning lights come on), you must install a replacement switch. There can be some variations on the procedure, so consult an automotive counselor for your particular year and mannequin.
Instructions
Remove the covers from the steering string by removing the screws from the backside comprehend; the upper incorporate should come honest off after the lower one. On some models, you must further remove the Chauffeur's side knee bolster.
3. Disconnect and remove the field lock switch from the lock cylinder housing; this is needed on some mid-size trucks cognate the Colorado. Disconnect the lock's electrical connector, and depress its tab with a slender screwdriver to Proceeds the switch.
4. Involve the explanation, and turn it to the "On" or "Flight" position. On some mid-size models you must turn it the other form into the "Adornment" position. Subsume the retainer pin into the gap in the lock cylinder, and pull the cylinder out of the steering column.
5. Disconnect the electrical connectors for the ignition switch from the cylinder--there can be one or two of them, depending on the model, and one of them can require twisting. Then remove the switch from the cylinder by pulling out its screws.
6. Screw the replacement switch in position on the lock cylinder, and connect its wiring harness (or harnesses) to the electrical connector(s).
7. Insert the lock cylinder in the same position it was in when you removed it, aligning the lock's retainer with the slot in the steering column housing. Press the cylinder in until the retainer activates.
8. Replace all other components in reverse order of removal.
