Fuel pumps transport fuel from your vehicle's Gauze vat to the Engine meeting.
Fuel pumps are one of the most Infamous parts in vehicles to oomph evil after a relatively short date. Fuel pumps feather a stable flow of fuel between your vehicle's Gauze vat and its fuel injectors. Luckily, replacing the fuel pump on an SRT4 is a elementary course that requires particular basic tools and a meagre minutes.
Instructions
1. Pull your SRT4 onto automobile ramps, and apartment the transmission in arena. Lock the parking brake extremely to prevent the opportunity of rolling or sliding.
2. Pop the vehicle's hood, and disconnect the adverse (ebon) terminal from the battery using a crescent wrench.
3. Climb under the vehicle, and establish the fuel pump along the fuel path between the vat and the engine meeting. The fuel pump is a small cylindrical part with an electrical lead coming off it.
4. Remove the electric lead using a 12 mm socket wrench. Turn the valve knob behind the pump on the line clockwise until it is tight. This will keep fuel from flowing to the pump.
5. Pull your vehicle off the car ramps.
Replace the electrical connection on the pump, and re-open the valve behind the pump.
8. Climb out from underneath the vehicle, and replace the negative battery terminal. Remove the old pump by loosening the mounting bolts on both sides of it using a crescent wrench, then pulling the pump away from the fuel line.6. Slide the replacement fuel pump into place and secure it with the mounting bolts you just loosened.7.
