The doctor pump is the feelings of the Ford Taurus cooling step. A faulty water pump could author the engine to overheat, causing draggy damage. To grasp your engine in beneficial running shape, alter your defective bathe pump. The succeeding counsel Testament parade you alternate a damp pump in a 1986 wrapped up 1995 Ford Taurus.
Instructions
Remove the Water Pump
1. Disconnect the anti battery cable before you eventuate.
2. Remove the cooling system from the radiator into a remove pan when the engine is chill.
3. Loosen and remove the aqua pump inlet tube.
4. Comprehend a ?-inch flex utilize in the girth tensioner to loosen it. Start the engine and check for leaks when the engine reaches normal operating temperatures.
6. Loosen and remove the retaining bolts from the pump and gate the baptize pump out of the engine.
Replace the Water Pump
7. Put sealing compound onto a new water pump gasket. Place the new water pump and new water pump gasket onto the cylinder block.
8. Connect the three bolts to the water pump and tighten them to between 15 to 22 feet lbs.
9. Reconnect the heater hose to the new pump. Install the water pump belt onto the pulley, making sure to adjust the tension on the belt.
10. Place a new o-ring onto the water pump inlet and install it, tightening the bolts to 7 feet lbs.
11. Close the draincock on the radiator.
12. Install the water pump pulley onto the drive belt, adjusting the tension on the belt.
13. Reconnect the negative battery cable.
14. Refill the cooling system with coolant to the proper levels. Turn the tensioner clockwise and select the cestuses off the pulleys.5. Remove the heater hose.
