The 1998 imitation year was a ample one for the S10, as it received its most current upgrade of its distant Industry growth. Outside were the sunken headlights from the preceding four senility of the moment date S10, and in came a advanced grille with flush-mounted headlights. The the rest of the S10's oppose retained the identical styling as the other moment age S10s. Replacing the exterior mirror on the 1998 S10 is not a mingled duty, on the contrary it demand removing the door panel to accretion access to the mirror's mounting hardware.
Instructions
Removal
1. Unfasten the inside door grip bezel screw using a Phillips-head screwdriver. Pull the inside door handle as provided you were opening the door, then slide the bezel gone from the haft to remove it.
2. Rotate the window Eccentric person, whether equipped with handbook windows, until the knob points upward. Slide a window Eccentric person Emigration baggage between the Eccentric person and the plastic washer until it engages the ears on the U-shaped clip securing the haft to the regulator's shaft. Press the window regulator factor downward to disengage the clip. Pull the employ and its plastic washer off the regulator shaft, and press the U-shaped clip back into its slot on the rear of the window regulator, with its ajar foot facing the utilize cusp of the Eccentric person.
3. Pry upward on the effectiveness trimming panel, provided equipped with efficacy windows, locks and mirrors, with a flat-head screwdriver to disengage its retaining clips. Lift upward on the panel until you can access the wiring on its underside. Unplug the force window, mirror and lock wiring harnesses. Locate aside the window switch panel and switches.
4. Remove the screw from the underside of the armrest using a Phillips-head screwdriver. Pry approximately the circumference of the door panel with a trim stick to disengage its retaining clips and pull the door panel from the door frame.
Press the window crank onto the regulator shaft until you hear the U-shaped clips click into place.11. Pull the inside door handle as if you are opening the door, and slide the inside door handle bezel onto the handle. Line up the bezel with the door lock knob and rod, and release the door handle.
Unplug the capacity mirror wiring harness, provided relevant, and remove the mirror-retaining nuts with a ratchet and socket. Pull the mirror from the vehicle.
Installation
7. Chaperon the fashionable mirror's mounting studs buttoned up the three holes in the door and hand-thread the nuts onto the studs. Torque the nuts to 53 inch-pounds using an inch-pound torque wrench and socket. Press the rubber plugs back into the fan access holes provided relevant. Plug the bent mirror wiring harness into the S10's wiring provided relevant.
8. Reinstall the door panel, lining up the panel's retaining clips with the holes in the door frame. Lightly tap all over the frontier of the door panel to engage the clips and lock the door panel into apartment. Tighten the screw in the underside of the armrest to 17 inch-pounds using an inch-pound torque wrench and a Phillips-bit socket.
9. Plug the power window, mirror and door lock wiring harnesses into their respective receptacles on the switches in the power accessory panel - the harnesses are different sizes to avoid mixing them up - if the S10 has power accessories. Set the power accessory panel onto the door panel, aligning its retaining clips with the slots in the door panel. Press downward on the panel to lock it into place.
10. Guide the plastic washer and window crank onto the regulator shaft, if equipped with manual windows.5. Pull the rubber plugs from the holes where the side-view mirror mounts to the door frame, exposing the nuts that secure the mirror.6.
Tighten the bezel's retaining screw to 17 inch-pounds.
