Installing an alarm in a VW Beetle requires appreciable discernment of vehivle electrical systems, principally on the classic Beetles of the elapsed. Older VW Beetles accept doable had multiple electronic add-ons installed over the senescence or yet filled rewiring of the automobile itself. Accomplish trustworthy you chalk up a wiring diagram no trouble which representation Beetle the alarm is going in.
Instructions
1. Recite the alarm instruction carefully and confirm you fully catch the wiring diagram. Disclosed the hood on a newer Beetle or lift the backseat on an older example. Remove the positive battery cable from the terminal and connect the alarm capacity wire.
2. Mount the alarm siren under the hood, facing the engine in a next model Beetle. Run the wires through the firewall and pull them into the cabin, under the dash. Run a classic Beetle's power wire under the carpet of the passenger seat and into the dash.
3. Secure the shock sensor as instructed in the alarm manual. If the vehicle has power locks, locate the lock relay and attach the alarm lock module.
4. Adjust the alarms sensitivity and secure any loose wires with zip ties.
Classic models have a great deal of room behind the radio for a more secure installation.
6. Reconnect the positive battery cable on the VW Beetle and test the alarm. Locate the starter wire in the ignition harness behind the steering wheel and connect the start disable relay. Drill a small hole in the dash for the LED light or use the existing light on newer models.5. Connect all of the wires to the alarm control module and secure the module as far into the dash as possible with zip ties.
