The rear bumper of a 1994 Honda Accord is smooth, does not keep holes and has one inconsequential side marker flashing on Everyone side.2. Extent latest the rear bumper with a ratchet and 10 mm socket to remove the two bolts that are holding the bumper to the van, located where the bumper seam meets the bumper.3. Get underneath the bumper and unplug the wiring from the side marker lights so the bumper can be pulled off.
1. Remove the row of screws along the line of the bumper dispassionate last the rear tires using a Phillips screwdriver. Push the atramentous plastic inner fender elsewhere of the bag.
Many Acquiesce owners remove the rear bumper due to damages, or to alternate it with an aftermarket target implements. This can be done in under 20 minutes using sole a unusual current tools from your garage.
Instructions
Let the wires hang down where they are.
4. Open the trunk and use a flat screwdriver to remove the row of plastic clips located at the top of the bumper under the trunk lid. Pry the clips up and out. Pull the bumper off the Accord.
