Provided you always entail a jump-start, modify your battery.
The battery in your 2002 VW Jetta TDI provides force to your starter Engine, so your engine can originate. Prize all machine batteries, it is a indubitable particular type of rechargeable battery. When your engine is running, the alternator of your motorcar recharges the battery. Over eternity, picnic wear and tear, along with time, can create your battery to die, at which location you Testament not be able to begin your motorcar without a jump-start. Luckily, replacing the battery in your 2002 VW Jetta TDI is straightforward.
Instructions
1. Emptied the hood to access the engine compartment. The battery is located inside the ebony housing latest the Chauffeur's side headlight. Squeeze the bar and lift the lid of the battery incorporate.
2. Loosen the seed on the opposite terminal connector and disconnect the cable from the absent terminal publicize. The contrary terminal is located on the left side of the battery and is noted with a minus memo. Securely position the cable butt end to prevent it from accidentally touching the negative terminal publish during remainder of the procedure.
3. Ajar the comprehend of the fuse box, which is on top of the battery between the terminal posts, and remove the devotee securing the cable that connects the fuse block to the positive battery terminal. Disconnect the cable and fuse box involve. Remove the bolt from the battery securing clamp and remove the clamp. The clamp is beneath the battery itself, with the bolt visible from the side of the battery.7.
5. Release the positioning tabs for the battery cover and remove it from the vehicle.
6. Position the fuse box and the battery embrace lid off to the side.4. Loosen the seed on the positive terminal connector and disconnect the cable from the positive terminal post.
Lift the old battery from the engine compartment. Remember that batteries are heavier than they look. Position the new battery in place.
8. Secure the battery in place with the clamp and install the bolt. Replace the battery cover. Connect the positive battery cable to the positive battery terminal and tighten the nut on the terminal connector.
9. Position the fuse box and battery cover lid. Connect the positive cable to the fuse block and reinstall the securing nut. Close the fuse box cover.
10. Connect the negative battery cable to the negative battery terminal and tighten the nut on the connector. Close the battery cover and hood and clean up.
