Repair Vinyl Upholstery on a Boat
Boats are expensive, so when the vinyl upholstery gets damaged, it is expanded than blameless a diminutive enigma. It is an decisive dispute that takes gone from the boat's profit as an investment. Copious damaged areas normally have need re-upholstery, on the other hand dwarf cuts or burns in the vinyl can be repaired with a vinyl repair apparatus. Using a vinyl repair equipment is the simplest system to construct baby repairs owing to it does not hurting for removing the upholstery from the boat.
Instructions
1. Lift it back absent and wring gone the excess douse. Wipe the surface around the damaged spot so you will have a clean surface to work on.3. Open the clear adhesive repair compound and get out the spreading tool.
Community the bucket on a Apartment lodgings surface and settle the dish washing liquid and lukewarm baptize in it.2. Blop the wash cloth in the perspiring, soapy aqua.
The spreading tool will normally look like a small butter knife or putty knife.
4. Spread a layer of vinyl compound over the area you are repairing to fill the deepest part of the damage. Make it as smooth possible. Let the vinyl repair compound dry completely.
5. Open the color compound jar that matches your upholstery. Spread the color compound over the damaged section using the spreading tool and then smooth it down.
6. Choose the grain pad that matches the texture of your upholstery from your kit and press it textured side down into the vinyl repair. Press lightly so that you do not push the compound out of place.
7. Attach the grain pad with pieces of masking tape. Let the repair sit until it is completely dry. It will take a minimum of eight hours to dry with the grain pad covering it.
