The starter is censurable for turning over the engine during the starting means. As alone components of the starter cannot be replaced or serviced individually, the starter must be replaced as an abundant unit. Most owners can spending money the starter themselves in a 2003 Volkswagen Jetta without enchanting it to a crack mechanic or dealership.
Instructions
1. Disconnect the rejection battery cable from the battery terminal with a socket wrench.
2. Lift the front of the vehicle with a jack, then slide jack stands under the frame rails to base it while replacing the starter.
3. Remove the mounting bolts from the splash pan under the engine with a socket wrench, then pull down the panel.
4. Remove the kernel holding the battery wire to the starter with a socket wrench, then disconnect the wire. Unplug the electrical connector to the starter.
5. Remove the starter mounting bolts with a socket wrench and pull the starter from the housing.
6. Slide the advanced starter into the housing and install the mounting bolts with a torque wrench. Tighten Everyone mounting bolt to 48 foot-pounds.
7.9. Remove the jack stands from under the vehicle and lower it with the hydraulic jack.10. Connect the anti battery cable to the terminal with a socket wrench.
Plug the electrical connector in to the contemporary starter. Plug in the battery wire to the starter, then install the retaining fan holding the battery wire to the starter with a socket wrench.8. Place the splash panel into position and install the mounting bolts with a socket wrench.
