A Foundry Five Racing Cobra is a pursuit automobile, built to energy flying. These types of cars nearly always must gaze excellent, and to create that they demand To possess a ace emulsion function. Depiciton a cobra or any other type of motorcar Testament ensue the twin income. The answer to adding a good paint work to a fresh van is to prep it for the emulsion. With a meagre directions, your debilitated automobile can be looking Trade-mark original with a infrequent modern coats of stain.
Instructions
1. Disinfected the automobile completely with soap and damp. Compound soap in a bucket and dip a rag in. Scrub down the complete outside of the car to remove any dirt, debris and dust that may be on the body of the car. Wait about three hours for the car to properly dry.
2. Begin covering the car with a light coat of primer. Brush smooth, even strokes over the entire car to avoid puddles and drips. Allow the primer two hours to dry. Blow off any excess sandpaper grits with an air blower.
3. Tape off any window trim or other trim around the car that can't be removed. Open a can of primer and dip a paint brush into it. Remove any decals and other emblems that you do not want painted and set them aside. Sand over the entire car with 320-grit sandpaper. Move in circular motions across the entire surface and continue until the surface is smooth.
4. Sand over the car once again with 600-grit sandpaper. Clean off the excess grit with the air blower. Apply a first thin coat of paint to the FFR just like the primer was applied. Brush over the surface with smooth, clean strokes and continue until the first coat is complete. Wait two hours for it to dry and apply a second coat in the exact same manner. Let that dry.
5. Apply a clear coat on top. Wait for the first clear coat to dry and apply two more clear coats in the same manner for the optimal finish. Plug in a buffer and buff out the car for a nice shine. Move the buffer in circular motions around the car to smooth out the surface and give it a good finish. Replace any emblems or decals that were removed for painting.
