A Camaro Z-28 is an fine automobile to operate, exceptionally on a blistering summer hour with the T-tops elsewhere. Tighten the screws and replace trim panels for both pillars.5. Check the clearance by replacing the T-top. Replacing the weather stripping can be expensive, so it is best to adjust the clearance first.
Instructions
1. Remove the T-tops and store them in a safe location. Remove the trim panels from the front and rear pillars to disclose the pin receivers.
2. Loosen the two screws that hold each receiver.
3. Tap each receiver down slightly with a light hammer. Remember to make small, incremental adjustments because moving the receiver too far can result in T-top damage.
4. Unfortunately, the majority of the era the T-tops Testament be in apartment, carefulness you roasting and dry. During the van's being, the T-tops may originate to leak. This is oftentimes a consummation of senility of driving and vibration, which causes the weather stripping to compress. The T-top pin receivers are adjustable and allow for changes in clearance.
The weather stripping should be more compressed, allowing for a tighter fit.
6. Repeat the process for the remaining side.
