Soundproof a Chrysler PT Cruiser
Apply a layer of Dynamat across the front floor, then replace the carpet. Pull back the rear carpet to perform the same task.3.
Instructions
1. Start by installing Dynamat or an equivalent data between the PT Cruiser's Floor-mat and the floorboard. Remove the shift handle and the centre console screws to remove the console. Remove the four bolts mounting Everyone seat to the floor and remove the seats.
2. Pull the Floor-mat from under the side trim panels and roll it backward.The PT Cruiser is a public wagon sold by the Chrysler Corp. Unlike many other vehicles, the Cruiser's floor is Apartment lodgings, moulding it accessible to cut plan blare by using soundproofing facts. The floor sketch in reality led the Environmental Safeguard Agency to categorise it as a machine rather than a vehivle.
Roll down each window and pull each rubber seal from the window frame housing. Install the new window seals. The seals are self-attaching and require no tools. As vehicles age, the window seals can dry-rot, allowing excessive wind noise into the vehicle.
4. Remove the rear cargo carpet and liner. Attach Dynamat to the floor and put the liner and carpet back in place. This will reduce the amount of exhaust noise in the vehicle.
