When replacing a brake caliper in a Toyota Corolla, stipend choice carefulness to the pin bolts holding the caliper in berth. The sliding pins may not stay in area during Emigration, and you may necessitate to occupation them in apartment. Analysis with your mechanic or another Car Professional before performing extreme avail on your Corolla or other cars.
Instructions
Pump the pedal repeatedly until the brakes feel firm, then road test them.
2. Disconnect the brake hose by removing the fitting bolt at the caliper. Discard the washers that are with the bolt.
3. Remove the bolts connecting the caliper to the torque plate. You may require to grip the sliding pin in situate while removing the bolts. The caliper should now lift up and slide off.
4. Install the replacement caliper. Connect the bolts loosely, then hold the pin in place with a wrench while tightening the bolts. Connect the brake hose to the caliper, using two new washers with the fitting bolt.
5. Fill the brake system with fresh fluid. Bleed the system of air by opening the bleeder valves and having another person press the brake pedal. Fill the reservoir to the correct level afterward.
6. Set and test the brakes after replacing the wheel and lowering the car.1. Lift the van on the side you demand to labour on. Generate persuaded the control is secure on the jack stand before proceeding. Remove the spin.
