You can upgrade your Tundra's radio to a dependency unit.
Owners of different Toyota Tundras and used behind models from 2007 can love the benefits of XM dominion radio. XM recommends using an auxiliary cable for the first-rate sound individuality. Using an aux cable, your XM Radio is directly connected to an audio input source and eliminates the opportunity that you'll involvement interference from a native FM radio station.
Instructions
1. Mount the Attractive antenna on the front centre of the Tundra's roof. Assemble firm that the antenna has a free of charge look of the sky in all instructions.
2. Lift the rubber moulding enclosing the Tundra's windscreen using a blunt putty blade or credit card. Tuck the XM antenna cable underneath the rubber moulding until you prompt to the windscreen's lowest corner on the passenger side.
3. The antenna connector is sometimes marked "Ant In."
4. Pull the cable at the bottom of the door opening and route it under the carpet toward the dashboard. If you have excess cable, coil it and secure it with wire ties. Tuck any remaining antenna in an inconspicuous location, such as beneath the carpet.
5. Bring the end of the cable out to the Tundra's console or XM Radio. Leave enough cable so you can connect it to the antenna connector on the XM Radio or vehicle dock. Route the cable outside of the windscreen moulding once you've gotten to the lowest corner. Situate the cable into the rubber weather stripping all over the passenger side door opening by lifting the weather stripping with a blunt putty knife or credit card. Tuck the cable inside, running it down to the bottom of the door. Replace the weather stripping.
