The torque converter increases the engine's torque output.
Among its multitudinous functions the torque converter drives the hydraulic bridle transaction's oil pump and increases the torque produced by the engine, which it then transfers to your vehicle's transmission. Furthermore, it is complete with transmission fluid. Conventional sageness holds that you wouldn't withdraw the fluid in the torque converter while you're changing your transmission fluid, that is unless you wanted to transform the torque converter fluid extremely.
Instructions
Torque Converters With A Drain Plug
1. Remove the converter dust subsume or access panel to disclose the converter-flywheel bolts. On some models you must head rotate the crankshaft by rotating the pulley fan at the front of the crankshaft with a ample breaker bar and socket. Place the drain plug, which should be at the 6 o'Watch position.
7. Reconnect the cooler line, and refill the transmission.
Transform the remove plug, and tighten to the torque requirements outlined in your owner's instruction.
Torque Converters Without A Drain Plug
4. Procure the avail of two partners to assist you pull this connection off.
5. Pennies the fluid in the sump pan, then disconnect the answer wrinkle between the radiator's transmission cooler part and the transmission, itself. Supple lines should disconnected from the transmission, while non-flexible lines should be disconnected from the cooler. Manipulate a quick-connect Trimmings Emigration effects. Be careful while doing this as there are two lines running from the cooler constituent to the transmission: consult the owner's textbook to decide which is the give back line.
6. Take a hose and attach it to either the flexible line or the cooler fitting, holding the other end of the hose into a large, clear container. Have one partner start the engine, as your other partner monitors the level of the fluid draining into the container. Meanwhile, you will be pouring fresh fluid. In some models, this will only work if the car is in "drive". To execute this, tell your partner to shift gears, while engaging the emergency brake and holding down the brake pedal. Once you notice only fresh fluid going into the container, shut down the engine.
2. Slide a extract pan underneath the plug, then remove the plug To admit the fluid to empty into the pan.3.
