Adjust your VW Beetle parking brake Homewards, saving you period and cash by avoiding the mechanics shop. Bring about this adaption for all older year Beetles, 1979 or earlier, when the machine starts to roll. Your older motorcar takes also adjustments than a just out van.
Instructions
1. Rotate the two nuts that are close to the hand brake lever. These are attached to the two rods sticking out of the back metal plate. They are the cables to your wheels parking brakes.
Fix the hand brake lever inside the automobile between the Chauffeur seat and the front passenger seat.2. Remove the covering encompassing the participation brake lever.3. On Type 2 models, adjust the nut from below the vehicle.
4. Raise the vehicle's rear wheels and loosen the locknut on the front of the hand brake lever that holds the cables in place.
5. Turn the adjusting nuts until you can feel a slight resistance when you spin the rear wheels around.
6. Release the nut until you can pull up on the hand brake lever and hear three clicks or three notches. Adjust type 2 models to hear six clicks or six notches.
