Custom a single-stage colouring on your automobile for a flashing, glossy appearance.
Portrayal an van is a time-consuming course that can admit your motorcar elsewhere of comission for as all the more as a week. One hook to save bout while not stinting on the inspect of the capacity is by using a single-stage paint instead of a two-stage portrayal manner. Unlike the adjustment of using a two-stage colour coat followed by a free coat, a single-stage emulsion includes the glossy shining within the colour itself. When it dries, the single-stage tint shines to a altitudinous gloss. This removes the itch for multiple layers of clear coat, allowing you to affection your advanced emulsion connection all the sooner.
Instructions
1. Disinfected the surface of the van where you intend to utilize the tint with a prepaint cleaner/degreaser. Spray the automobile with the cleaner and then wipe away any dirt or debris that's present with a clean cloth. Wait for the cleaner to dry before applying the paint. There is no rinsing necessary.
2. Place masking paper and tape over any areas you do not want to paint. Press the tape tightly in place, making sure that there are no gaps along the edge which may allow paint underneath.
3. Wipe the surface of the car with tack cloth to remove all trace of dust.
4. Fill the paint reservoir of your paint sprayer with an epoxy primer. Fill the paint sprayer with the single stage paint. Follow the same application method you used for the primer. Overlap each applied paint row by 50 percent to ensure complete and even coverage.
Spray the edges of the auto body panel, then work the primer onto the hood in a side-to-side motion. Apply the primer in rows until you've covered the entire panel before moving onto the next car panel. Allow the primer to dry 20 minutes.
6. Set the air pressure for the sprayer to between 40 and 50 psi for a gravity- or siphon-feed gun, or between six and 10 psi for an HVLP sprayer.5. Spray the car surface with the primer. Wait 15 minutes for the paint to start drying.
7. Use the same coverage process with a second and then a third coat of paint. Allow the paint to dry completely for Day and night before using the vehicle.
