Fiberglass fenders can interchange the appearance of your vehicle.
Quarters the observe of your vehicle by installing fiberglass fenders. Fiberglass fenders generally ultimate longer than plastic fenders and are easier to repair in example of an accident. These directions practice to both front and rear fenders.
Instructions
1. Remove the commencing fenders from the side of the motorcar by unbolting the bumper and then unbolting the fenders from the sides of the front shove wells. Control all hardware, on the other hand you can discard the introductory fenders or sell them. Disconnect the headlights from the machine by disconnecting the wires from the headlights with pliers.
2. Dominance the fiberglass fender against the side of the vehivle. Point the placement of the core flotation bolts against the side of the fender with permanent marker. Some fiberglass fenders accept dents in the side where they should rank with the bolts.
3. Assign on a dust mask and eye Safeguard. Domicile the fender on a sturdy surface and clasp it regular with your left handwriting. Drill 1/4-inch-wide holes into the pronounced areas on the fender all the road buttoned up the fenders.
4. Habitat the fender back against the van and bolt the core bolts to the fender by handwriting. Speedy the hood of the automobile to make sure the hood does not scrape against the fender. Open and close the doors to make sure the fender does not scrape against them either. Check to ensure the fender fits snugly against the headlight and there are no major gaps. Adjust the placement of the fender if necessary.6. Tighten the core fender bolts with the ratchet once the placement is secure and aligned.
Adjust the placement of the fender as necessary.5. Install the headlight back in front of the fender using a ratchet. Tighten the bolts.
Re-drill any holes if the fender needs to be positioned differently.
7. Repeat the process for the second fender. Re-bolt the bumper to the front of the vehicle if you had to remove it to access the fenders.
